Software helps contractors manage job tasks
Knowify has launched its software management tool designed to help contractors operate their businesses through mobile devices.
Optimized for use on a tablet, the cloud-based software reportedly can be used for creating contract estimations, issuing purchase orders, invoicing and job scheduling, among other tasks.
Website: www.knowify.com
Telephone: (212) 233-3230
Drill screws available in new sizes
Triangle Fastener Corp. has added 1 1/4- and 2-inch drill screws to its line of BLAZER® Stainless Cap Head Drill Screws.
The drill screws reportedly feature stainless-steel cap heads and EPDM washers to ensure performance in harsh environments and can be used to tap up to 1/2-inch-thick steel. Each screw is said to have a TRI-SEAL® 1,000-hour salt-spray coating to improve lubricity during tapping and increase corrosion resistance.
Website: www.trianglefastener.com
Telephone: (800) 486-1832
Grinders fit in tight spaces
DEWALT® has introduced three 4 1/2-inch small-angle grinders: a DWE4222N model, a DWE4222 model and a DWE4224 model. The small-angle grinders are said to be useful for grinding and beveling steel, grinding welds, cutting pipe and preparing concrete surfaces in tight spaces.
The grinders feature improved brake systems to stop the wheels faster, Lanyard Ready™ Connections to enable users to tether the grinders at job sites and new motor designs built with 40 percent more copper to increase power capability. Each grinder model also has an E-CLUTCH™ that activates in less than 1/10 of a second when a wheel pinch or stall event is detected and a Dust Ejection System™ designed to filter debris from the air that is pulled across the motor to cool it.
With a weight of 4.6 pounds, circumference of 194 millimeters and a One-Touch™ guard allowing users to adjust the guard in a single motion, each grinder reportedly is comfortable to use.
Website: www.dewalt.com
Telephone: (800) 433-9258
Heated storage units protect supplies
KNAACK® has introduced its THERMOSTEEL™ heated storage unit designed to protect tools and materials stored at job sites during cold weather. When temperatures drop below 40 F, the unit can be plugged into a power source to maintain a warm space for supplies.
The storage unit reportedly features a Watchman IV independent locking system to protect against theft and harsh job-site conditions, a TOOL KAGE™ door and thermal blanket to preserve an optimal temperature and a raised chest floor to provide users with easy access to items stored at the unit's bottom. Some models also feature Junk Trunk™ quick-access drawers, a set of heavy-duty lockable drawers said to provide quick access to tools and accessories.
Website: www.knaack.com
Telephone: (800) 456-7865
Membranes seal out air and water
SOPREMA Inc. has developed two spray-applied liquid membranes, SOPRASEAL® LM 202 VP (vapor permeable) and LM 203. The membranes are available in permeable and nonpermeable options.
SOPRASEAL LM membranes reportedly ensure a continuous air barrier and effective water resistance as a result of seamless installation. The membranes can be installed in temperatures as low as 25 F and are said to be easily cleaned with water.
Website: www.soprema.us
Telephone: (800) 356-3521
Perimeter edge systems fit low-slope roof systems
ATAS International Inc. has introduced a line of metal perimeter edge systems for low-slope roof systems.
The perimeter edge systems are fabricated to meet the needs of any project and are available in a variety of materials, gauges and colors. All perimeter edge systems reportedly meet ANSI/SPRI ES-1 wind-resistance standards.
Website: www.atas.com/perimeter-edge
Telephone: (800) 468-1441
Color blends are CRRC-approved
DaVinci Roofscapes® has added four color blends to its DaVinci EcoBlend® line of color blends for polymer shake and slate tile roofs: Tahoe-EcoBlend, Autumn-EcoBlend, Brownstone-EcoBlend and Slate Gray-EcoBlend.
DaVinci EcoBlends reportedly have received approval by the Cool Roof Rating Council (CRRC) and meet Title 24 requirements in California.
Website: www.davinciroofscapes.com
Telephone: (800) 328-4624
Drains handle increased water flow
Mule-Hide® Products Co. has introduced several roof drains for new construction and retrofit applications.
Available in multiple sizes, the roof drains feature elevated strainer ring risers for increased water flow through the drain and clamping rings with ribbed undersides to ensure the drain ring is tightly secured to the roof membrane.
The roof drains for new construction projects have epoxy-coated aluminum clamping rings 1 1/4 inches high with 12 scallops and seep holes for maximum drainage and aluminum underdeck clamps to fasten the drain to the roof deck.
The roof drains for retrofit applications are offered with aluminum and copper outlets and feature a large stud diameter to increase hardware strength.
Website: www.mulehide.com
Telephone: (800) 786-1492
Application system applies two-part adhesives
OMG Roofing Products has introduced PaceCart 3,™ the most recent version of an application system designed to apply OlyBond500 adhesives.
PaceCart 3 reportedly features a new manifold for the application of two-part low-rise adhesives, two low-maintenance pumps for use with high-viscosity liquids, a color-coded adhesive tray to help prevent cross-contamination between adhesive components and an electrical system with a voltage meter to help identify power input. A shelf has been added to the cart to hold a portable generator, enabling cordless mobility and eliminating a potential tripping hazard.
Website: www.omgroofing.com
Telephone: (800) 633-3800
Roof panels compatible with 1/2:12 slopes
Green Span Profiles has introduced RidgeLine, a mechanically seamed roof panel, to its line of insulated roof panels.
The 2 3/8-inch-tall RidgeLine panels feature a polyisocyanurate insulating foam core, cover 42 inches and are available in thicknesses of 2 1/2, 3, 4 or 5 inches. The panels can be used on slopes as low as 1/2:12 and are available in standard lengths from 12 to 53 feet with an option for custom lengths. A weathertight seal with no interruption at the clips reportedly is formed when the panels are fitted together. The panels are said to have factory-applied sealant in the batten cap and proprietary shoulder fasteners to prevent over-driving.
Website: www.greenspanprofiles.com
Telephone: (844) 807-7400
COMMENTS
Be the first to comment. Please log in to leave a comment.