Marketplace

AceClamp^® A2^® micro L foot

AceClamp optimizes the installation of micro-inverters to standing-seam metal roofs by creating a new micro L foot that attaches to its family of A2 clamp products. You now can install a micro-inverter onto a roof without contacting the roof itself. The micro L foot attaches directly to the clamp, guaranteeing no damage to roof panels. AceClamp's patented push-pin design will not scratch roof panels' finishes or coatings, meaning the manufacturer's warranty will not be voided. This fully assembled product is another way to get you on and off the roof faster. After all, "The Proof is on the Roof."™ For more information, contact us at (860) 351-0686 or visit www.aceclamp.com.

SOPREMA expands 3-in-1 SOPRASMART^® product line

SOPREMA Inc. has added SOPRASMART Board 180 ISO to its time- and cost-saving product line, combining high-performance SBS polymer-modified bitumen membrane and cover board into one installation layer with 2 inches of SOPRA-ISO polyisocyanurate insulation. These layers are factory-laminated together, resulting in application consistency and complete adhesion. In addition, installers can gain valuable time on job sites reducing labor costs and increasing overall job efficiency. For more information about the SOPRASMART family, visit www.soprema.us.

Solar panel lift platforms offer 30-day free trial

Easi-Dec^® from Kee^® Safety provides safe access and fall protection for workers installing solar panels. A cost-effective alternative to renting or building scaffolds, Easi-Dec Platforms are corrosion-resistant and feature a secure hoist to lift solar panels to roofs. Systems can be set up by two workers in 10 minutes and are lightweight and compact for ease of storage and transportation. Now available with a 30-day free trial. Call (800) 851-5181 or visit Easi-Dec.com.

Malarkey's new reflective cap sheet RCap™ Plus

Malarkey Roofing Products^® has introduced the 524G RCap Plus reflective cap sheet. The sheet is made with highly reflective white granules embedded into the SBS polymer-modified membrane. Designed and engineered to perform in extreme weather conditions, the topside edge of the sheet is built with a 2-inch (51-mm) sand selvage for lap joint seams. The 524G RCap Plus cap sheet is sustainable, innovative and an excellent addition to Malarkey's low-slope product line. Learn more at www.malarkeyroofing.com.

Weld flashing and edge details with ease

Leister Technologies' UNIROOF AT/ST automatic welder is a parapet-friendly solution for welding thermoplastic roof membranes on low- or steep-slope roofs (up to 30 degrees). Thanks to its ultraslim design and movable transport axle, you can effortlessly weld close to the edge and at or on the parapet without having to modify your machine. Additionally, the design permits you to easily navigate narrow spaces and weld beneath and around obstacles. Available in 120- or 230-volt versions, the UNIROOF AT/ST offers speedy top performance on any roof. For more information, visit www.leister.com.

Fall-protection warning-line system

SpeedStand from Quicksilver Engineering makes protecting workers from falls quick and easy. Compact, one-piece stands transport easily and set up instantly. These durable steel stands are spaced 40 feet apart and meet Occupational Safety and Health Administration requirements. There also is a model for use on standing-seam metal roofs. See why SpeedStand has been the industry standard for 16 years. For more information, call (800) 460-7579 or visit www.qe-1.com.